When it comes to bond cleaners in Perth, few have the level of experience that I do as the Director of Majestic Vacate Cleaning Perth. Having completed over 1,000 end of lease cleanings in Perth and recommended by over 50 real estate agencies, I’ve seen firsthand the challenges of DIY bond cleaning. While the internet is full of tips on using household products, the reality is that vacate cleaning in Perth requires thorough preparation, the right equipment, and a methodical approach. This guide will help make the process easier and cost-effective without cutting corners.
What is Bond Cleaning?
Bond cleaning, also referred to as end of lease cleaning, is the final cleaning process when tenants vacate a rental property. The goal is to leave the property in the same condition it was at the beginning of the tenancy, barring normal wear and tear. A successful bond clean ensures you get your full security deposit back, which is why it’s critical to get it right.
DIY Bond Cleaning: Can It Really Save You Money?
If done correctly, DIY bond cleaning can be a cost-effective alternative to hiring professional bond cleaners in Perth. However, skipping essential steps or using improper tools can make the task much more labor-intensive and time-consuming than necessary.
Essential Equipment for DIY Bond Cleaning in Perth
To achieve professional-level results, you need the right tools. After years of cleaning, here’s what I’ve found works best for vacate cleaning without breaking the bank:
- Oven cleaner (BAM Easy Off)
- Jif cream cleanser
- Multipurpose cleaner
- Rapid Hygiene Easy Clean Degreaser
- 3-step ladder
- Bleach
- Magic sponges
- Grout cleaning brushes and scourer sponges
- Squeegee and applicator for window cleaning
- High-quality microfiber cloths (at least 30 sets)
Expect to spend around $50 on these supplies, but you can save even more by purchasing them online through retailers like eBay or Amazon. Additionally, make sure you have access to your regular household cleaning gear, such as a vacuum and mop.
Safety First: Protect Yourself During the Clean
Before diving into any bond cleaning in Perth, always prioritize safety. Read the Safety Data Sheets (SDS) and instructions for each chemical product you plan to use. Make sure you have the following Personal Protective Equipment (PPE):
- Safety glasses
- Gloves
- Masks
- Full-sleeve clothes
- Apron or old clothes
- Covered shoes
Step-by-Step DIY Bond Cleaning Guide
Now that you have the necessary tools and protective gear, it’s time to tackle the clean. Follow this detailed step-by-step guide for the best results.
1. Preparation
Focus on areas that require the most work first to allow chemicals to soak in.
- Soak oven trays and stovetop accessories with BAM oven cleaner.
- Spray the cooking areas and let the chemicals sit.
- In the bathroom, wet the tiles before applying bleach.
- Soak range hood filters in the laundry sink.
2. Kitchen
Work from top to bottom.
- Use Rapid Hygiene Degreaser on greasy surfaces.
- Clean cupboards inside and out.
- Leave the benchtops and sinks for last.
3. Bathroom
Start with exhaust fans and mirrors.
- Scrub shower tiles, basins, and toilet bowls.
- Use Jif for tough stains and grime.
- Clean and polish fixtures, including the vanity.
4. Bedrooms and Living Areas
Don’t forget the finer details.
- Dust light fittings, ceiling corners, and skirting boards.
- Clean windows, tracks, and frames.
- Spot-clean any marks on the walls.
5. Laundry
Follow the same top-down method as in other rooms.
- Scrub the trough, shelving, and doors.
6. Appliances and Accessories
Give extra attention to kitchen appliances.
- Clean the range hood and oven thoroughly.
- Polish stainless steel surfaces for a professional finish.
7. Exterior Areas
Don’t overlook the outside.
- Clean all exterior windows.
- Sweep and remove cobwebs from garage and patio areas.
8. Final Check
After you’ve cleaned each room, double-check everything.
- Vacuum carpets and hard floors.
- Mop all hard floors using a diluted degreaser solution.
Final Thoughts: DIY Bond Cleaning vs. Professional Help
While DIY end of lease cleaning in Perth can save you some money, it’s also an intense, time-consuming task. By following this guide and using the right products, you can improve your chances of getting your full bond back. But if the task feels overwhelming, hiring professional bond cleaners in Perth might be worth the investment for peace of mind and time saved.